Sell Electro-Hydraulic Pile Driver (SF558)

Detailed Selling Lead Description Features:
1) Driving power/rope length: 30kW, 360m
2) Speed with rope of main hoist: 15.6, 16.6, 17.6, 18.5, 19.5, 20.5m/min
from floor 1 to 6 respectively
3) First layer pull force of main hoist: 93.7, 88.2, 83.3, 79, 75, 71.4kN from
floor 1 to 6 respectively
4) Driving power/rope length: 22kW, 80m
5) Speed with rope under ranged hoist: 10 ~ 13.5 m/min
6) First layer pull force of ranged hoist: 87kN
7) Driving power/rope length: 9kW/150m
8) Speed with rope of auxiliary hoist: 10.7 ~ 12.9m/min
9) First layer pull force of auxiliary hoist: 50kN
10) Traveling speed:0.3 ~ 0.6km/h (5 ~ 10m/min)
11) Swing speed: 1r/min
12) Swing driving power: 18.5kW
13) Pressure of hydraulic system: 28MPa for traveling, and 18MPa for oil
cylinder
14) Traveling mode/swing angle: hydraulic crawler/360 degree
15) Climbing capacity of pile support: 18 degree (removing mast during
upward and downward the pit), 2 degree (with mast)
16) Supporting mode of mast: supported by 3 points of bearing
17) Maximum/combined length of mast: 36/21, 24, 27, 30, 33m (5 kinds)
18) Mast diameter: 720mm
19) Allowed pile pullout force of mast: 600kN
20) Center distance of two small/big guide rails: 330/600mm
21) Declining range of mast: 5 degree for forerake and retroversion
respectively
22) Length/width of undercarriage on ground: 4,790mm/outspread 4,400mm,
3,400mm for contraction
23) Crawler width: 760mm
24) Push force of front outrigger cylinder: push 424/pull 163kN
25) Push force of back outrigger cylinder: push 424/pull 163kN
26) Push and pull force of jack oil cylinder: push 84/pull 43kN
27) Push and pull force of oil cylinder at crawler shoe width:181/134kN
28) Push force for horizontally adjusting oil cylinder: push 422/pull 290kN
29) Linear velocity under inclined supporting adjustment: push 0.96/pull
1.87m/min
30) Ground pressure (without working devices): supporting leg: 0.46MPa,
crawler rail 0.065MPa
31) Quality of combined balance weight: 9.5, 3.5, 3.5MT
32) Overall dimensions under working state: 10.29 x 4.4 x 36m
33) Dimensions under transport action: 10.29 x 3.3 x 3.28m
34) Gross weight of the whole machine: 69.9MT (excluding balance weight)